ShopBaseFree forever shop management software for auto repair shops

Try ShopBase Free →

Home/Torque Specs/Ford/Ranger/1998-2011 3.0L V6 Vulcan/CV Boot - Outer

1998-2011 Ford Ranger CV Boot - Outer Torque Specs

3.0L V6 Vulcan

Applies to 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, and 2011 Ford Ranger

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values14 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
Axle Nut	184	250	Use new cotter pin or stake nut
⚠️ CV Bolts	47	64	—
CV Bolts	47	64	—
Cover Screws	8	11	—
Cover Screws	8	11	—
Differential Cover Bolts	26	35	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	21	28	—
Mounting Bolts	21	28	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern
Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

CV Boot - Outer Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for cv boot - outer on a 1998-2011 Ford Ranger?

The primary torque specification for cv boot - outer on a 1998-2011 Ford Ranger is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Ford Ranger cv boot - outer?

There are 14 torque specifications for cv boot - outer on the 1998-2011 Ford Ranger 3.0L V6 Vulcan, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes