Home/Torque Specs/Ford/Ranger/1998-2011 3.0L V6 Vulcan/Transmission Speed Sensor - Input

1998-2011 Ford Ranger Transmission Speed Sensor - Input Torque Specs

3.0L V6 Vulcan

Applies to 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, and 2011 Ford Ranger

Labor Time:1 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
Cover Screws	8	11	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	47	64	—
Mounting Bolts	21	28	—
Mounting Bolts	21	28	—
Mounting Bolts	47	64	—
⚠️ Pan Bolts	13	17	—
Pan Bolts	13	17	—
Sensor Bolts	8	11	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Speed Sensor - Input Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for transmission speed sensor - input on a 1998-2011 Ford Ranger?

The primary torque specification for transmission speed sensor - input on a 1998-2011 Ford Ranger is 11 Nm (8 lb-ft).

How many torque specs are there for Ford Ranger transmission speed sensor - input?

There are 16 torque specifications for transmission speed sensor - input on the 1998-2011 Ford Ranger 3.0L V6 Vulcan, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes