Home/Torque Specs/Ford/Taurus/1996-1999 3.0L V6 Vulcan/Steering Angle Sensor

1996-1999 Ford Taurus Steering Angle Sensor Torque Specs

3.0L V6 Vulcan

Applies to 1996, 1997, 1998, and 1999 Ford Taurus

Labor Time:1 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
Mounting Bolts	21	28	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	79	107	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	42	57	—
⚠️ Wheel Lug Nuts	105	142	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for steering angle sensor on a 1996-1999 Ford Taurus?

The primary torque specification for steering angle sensor on a 1996-1999 Ford Taurus is 11 Nm (8 lb-ft).

How many torque specs are there for Ford Taurus steering angle sensor?

There are 8 torque specifications for steering angle sensor on the 1996-1999 Ford Taurus 3.0L V6 Vulcan, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes