Home/Torque Specs/Ford/Taurus/2000-2007 3.0L V6 Duratec/Head Gasket - Single

2000-2007 Ford Taurus Head Gasket - Single Torque Specs

3.0L V6 Duratec

Applies to 2000, 2001, 2002, 2003, 2004, 2005, 2006, and 2007 Ford Taurus

Labor Time:12 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
⚠️ Camshaft Bearing Cap Bolts	10	14	Tighten in sequence, 3 passes
⚠️ Camshaft Cap Bolts	10	14	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
⚠️ Cylinder Head Bolts	26 +180°	35	REPLACE BOLTS. Step 1: 26 lb-ft. Step 2: 44 lb-ft. Step 3: Loosen 1 turn. Step 4: 26 lb-ft. Step 5: +90°. Step 6: +90°.
⚠️ Cylinder Head Bolts Step 1	30	40	Always use new TTY bolts
⚠️ Cylinder Head Bolts Step 2	59	80	Tighten in sequence
⚠️ Cylinder Head Bolts Step 3 (90 deg)	7	10	Plus 90 degrees
⚠️ Exhaust Manifold Nuts	22	30	Apply anti-seize, work hot-to-cold
⚠️ Intake Manifold Bolts	18	25	Tighten in sequence
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Rocker Arm Bolts	22	30	Tighten with cam lobe pointing away
Thermostat Housing Bolts	11	15	—
⚠️ Timing Chain Guide Bolts	9	12	Replace if worn
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
Valve Cover Bolts	7	10	Tighten in sequence
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Head Gasket - Single Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for head gasket - single on a 2000-2007 Ford Taurus?

The primary torque specification for head gasket - single on a 2000-2007 Ford Taurus is 14 Nm (10 lb-ft). Note: Tighten in sequence, 3 passes

How many torque specs are there for Ford Taurus head gasket - single?

There are 16 torque specifications for head gasket - single on the 2000-2007 Ford Taurus 3.0L V6 Duratec, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes