Home/Torque Specs/Ford/Taurus/2004-2004 3.0L V6 Duratec/Flywheel Replacement

2004-2004 Ford Taurus Flywheel Replacement Torque Specs

3.0L V6 Duratec

The 2004 Ford Taurus is equipped with a 3.0L V6 engine. Below you'll find detailed flywheel replacement torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	21	28	—
⚠️ Mounting Bolts	47	64	—
⚠️ Pan Bolts	13	17	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Flywheel Replacement Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for flywheel replacement on a 2004-2004 Ford Taurus?

The primary torque specification for flywheel replacement on a 2004-2004 Ford Taurus is 11 Nm (8 lb-ft).

How many torque specs are there for Ford Taurus flywheel replacement?

There are 8 torque specifications for flywheel replacement on the 2004-2004 Ford Taurus 3.0L V6 Duratec, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs