ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Ford/Taurus/2008-2008 3.5L V6/AC Pressure Sensor

2008-2008 Ford Taurus AC Pressure Sensor Torque Specs

3.5L V6

The 2008 Ford Taurus is equipped with a 3.5L V6 engine. Below you'll find detailed ac pressure sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.5 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ AC Line Fittings	15	20	Use new O-rings, add PAG oil
Blower Motor Screws	3	4	—
⚠️ Compressor Bolts	29	39	—
Cover Screws	9	12	—
Duct Clips	2	3	—
Hose Clamps	2	3	—
⚠️ Line Fittings	17	23	Use new O-rings, add oil
Mounting Bolts	23	31	—
Mounting Bracket Bolts	21	28	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

AC Pressure Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for ac pressure sensor on a 2008-2008 Ford Taurus?

The primary torque specification for ac pressure sensor on a 2008-2008 Ford Taurus is 20 Nm (15 lb-ft). Note: Use new O-rings, add PAG oil

How many torque specs are there for Ford Taurus ac pressure sensor?

There are 9 torque specifications for ac pressure sensor on the 2008-2008 Ford Taurus 3.5L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs