ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Ford/Taurus/2008-2008 3.5L V6/Wheel Studs

2008-2008 Ford Taurus Wheel Studs Torque Specs

3.5L V6

The 2008 Ford Taurus is equipped with a 3.5L V6 engine. Below you'll find detailed wheel studs torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.8 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
Cover Screws	9	12	—
⚠️ CV Bolts	52	70	—
⚠️ CV Joint Bolts	52	71	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft Bolts	63	85	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	23	31	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Wheel Studs Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for wheel studs on a 2008-2008 Ford Taurus?

The primary torque specification for wheel studs on a 2008-2008 Ford Taurus is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Ford Taurus wheel studs?

There are 9 torque specifications for wheel studs on the 2008-2008 Ford Taurus 3.5L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs