ShopBaseFree forever shop management software for auto repair shops

Try ShopBase Free →

Home/Torque Specs/GMC/Canyon/2004-2012 2.8L I4/Driveshaft

Driveshaft Torque Specifications

2004-2012 GMC Canyon 2.8L I4

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values22 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	189	256	Use new nut, stake after
Axle Nut	189	256	Use new nut, stake after
⚠️ CV Bolts	47	64	—
CV Bolts	47	64	—
⚠️ CV Joint Bolts	47	64	—
CV Joint Bolts	47	64	—
Cover Screws	8	11	—
Cover Screws	8	11	—
⚠️ Differential Cover Bolts	26	35	Apply RTV sealant
Differential Cover Bolts	26	35	Apply RTV sealant
Differential Yoke Pinion Nut	148	200	Mark position before removal
⚠️ Differential Yoke Pinion Nut	148	200	Mark position before removal
Driveshaft Bolts	58	79	—
⚠️ Driveshaft Bolts	58	79	—
Driveshaft Center Support	26	35	—
Driveshaft Center Support	26	35	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	21	28	—
Mounting Bolts	21	28	—
⚠️ Wheel Lug Nuts	105	142	—
Wheel Lug Nuts	105	142	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Driveshaft Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Audi TT

2016-2023 2.0L Turbo I4

BMW i4

2022-2024 eDrive40 Single Motor RWD

Common Questions

What is the torque spec for driveshaft on a 2004-2012 GMC Canyon?

The primary torque specification for driveshaft on a 2004-2012 GMC Canyon is 256 Nm (189 lb-ft). Note: Use new nut, stake after

How many torque specs are there for GMC Canyon driveshaft?

There are 22 torque specifications for driveshaft on the 2004-2012 GMC Canyon 2.8L I4, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes