Home/Torque Specs/GMC/Canyon/2004-2012 2.8L I4/Lower Control Arm - Front

Lower Control Arm - Front Torque Specifications

2004-2012 GMC Canyon 2.8L I4

Labor Time:2 hours

🔧 Torque Values18 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	74	100	Tighten to align cotter pin hole.
Ball Joint Nut	74	100	Tighten to align cotter pin hole.
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Control Arm Bolts	122	165	Torque with vehicle weight on wheels
⚠️ Lower Control Arm Pivot Bolts	129	175	TORQUE AT RIDE HEIGHT.
Lower Control Arm Pivot Bolts	129	175	TORQUE AT RIDE HEIGHT.
Mounting Bolts	21	28	—
Mounting Bolts	21	28	—
⚠️ Strut Bolts	89	121	—
Strut Bolts	89	121	—
Strut Tower Nuts	37	50	—
⚠️ Strut Tower Nuts	37	50	—
Sway Bar Link	47	64	—
⚠️ Sway Bar Link	47	64	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	105	142	Torque in star pattern
Wheel Lug Nuts	105	142	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Lower Control Arm - Front Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for lower control arm - front on a 2004-2012 GMC Canyon?

The primary torque specification for lower control arm - front on a 2004-2012 GMC Canyon is 100 Nm (74 lb-ft). Note: Tighten to align cotter pin hole.

How many torque specs are there for GMC Canyon lower control arm - front?

There are 18 torque specifications for lower control arm - front on the 2004-2012 GMC Canyon 2.8L I4, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes