ShopBaseComplete shop management for auto repair shops · $249/mo
Try ShopBase →
Home/Torque Specs/GMC/Canyon/2008-2008 2.9L I4/Steering Angle Sensor

2008-2008 GMC Canyon Steering Angle Sensor Torque Specs

2.9L I4

The 2008 GMC Canyon is equipped with a 2.9L inline-4 engine. Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:XFB
Labor Time:1 hours
View Labor Time Details →

🔧 Torque Values8 specifications

Componentlb-ftNmNotes
811—
2027—
2230Use new O-rings | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
75102—
74100⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
4155Use new cotter pin | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
4054—
100136—
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 2008-2008 GMC Canyon?

The primary torque specification for steering angle sensor on a 2008-2008 GMC Canyon is 11 Nm (8 lb-ft).

How many torque specs are there for GMC Canyon steering angle sensor?

There are 8 torque specifications for steering angle sensor on the 2008-2008 GMC Canyon 2.9L I4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes