ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free →
Home/Torque Specs/GMC/Yukon/2021-2024 6.2L V8/Upper Control Arm - Front

2021-2024 GMC Yukon Upper Control Arm - Front Torque Specs

6.2L V8

Applies to 2021, 2022, 2023, and 2024 GMC Yukon

Labor Time:1.9 hours
View Labor Time Details →

🔧 Torque Values12 specifications

Componentlb-ftNmNotes
37
+90°
50Tighten to 37 lb-ft then loosen 180°. Tighten to 37 lb-ft + 90-100 degrees (verify year).
37
+90°
50Tighten to 37 lb-ft then loosen 180°. Tighten to 37 lb-ft + 90-100 degrees (verify year).
128174—
128174—
90122⚠️ TORQUE AT RIDE HEIGHT (Weight on wheels) to prevent bushing failure.
90122⚠️ TORQUE AT RIDE HEIGHT (Weight on wheels) to prevent bushing failure.
2737—
2737—
115156—
115156—
135183—
135183—
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm - Front Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for upper control arm - front on a 2021-2024 GMC Yukon?

The primary torque specification for upper control arm - front on a 2021-2024 GMC Yukon is 50 Nm (37 lb-ft). Note: Tighten to 37 lb-ft then loosen 180°. Tighten to 37 lb-ft + 90-100 degrees (verify year).

How many torque specs are there for GMC Yukon upper control arm - front?

There are 12 torque specifications for upper control arm - front on the 2021-2024 GMC Yukon 6.2L V8, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes