Battery Test Torque Specifications

2006-2010 Jeep Commander 3.7L V6

Labor Time:0.2 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Battery Hold-Down Bolt	8	11	Do not overtighten
⚠️ Battery Terminal Bolts	5	7	Clean terminals
Bracket Bolts	15	20	—
Connector Bolts	5	7	—
Cover Screws	8	11	—
⚠️ Ground Cable Bolt	10	14	—
Mounting Bolts	20	27	—
Sensor Bolts	8	11	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

1990-1997 4.6L V8 Modular

2007-2012 3.7L I5

2011-2016 6.7L V8 Power Stroke Diesel

2022-2024 GT-Line Dual Motor AWD

1992-1995 1.5L I4 D15

2016-2023 2.0L Turbo I4

The primary torque specification for battery test on a 2006-2010 Jeep Commander is 11 Nm (8 lb-ft). Note: Do not overtighten

There are 8 torque specifications for battery test on the 2006-2010 Jeep Commander 3.7L V6, covering all related fasteners and components.