Home/Torque Specs/Jeep/Gladiator/2020-2024 3.6L V6/Transmission Control Module

2020-2024 Jeep Gladiator Transmission Control Module Torque Specs

3.6L V6

Applies to 2020, 2021, 2022, 2023, and 2024 Jeep Gladiator

Labor Time:1 hours

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
Cover Screws	9	12	—
⚠️ Drain Plug	29	39	Use new washer
⚠️ Fill Plug	29	39	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	23	31	—
⚠️ Mounting Bolts	52	70	—
⚠️ Mounting Bolts	52	71	—
⚠️ Pan Bolts	14	19	—
⚠️ Pan Bolts	14	19	Torque in sequence
Sensor Bolts	9	12	—
Sensor Bolts	9	12	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Control Module Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for transmission control module on a 2020-2024 Jeep Gladiator?

The primary torque specification for transmission control module on a 2020-2024 Jeep Gladiator is 12 Nm (9 lb-ft).

How many torque specs are there for Jeep Gladiator transmission control module?

There are 13 torque specifications for transmission control module on the 2020-2024 Jeep Gladiator 3.6L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes