ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Jeep/Wrangler/2000-2000 2.4L I4/Steering Coupler

2000-2000 Jeep Wrangler Steering Coupler Torque Specs

2.4L I4

The 2000 Jeep Wrangler is equipped with a 2.4L inline-4 engine. Below you'll find detailed steering coupler torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	25	34	—
Cover Screws	8	11	—
Mounting Bolts	20	27	—
⚠️ Power Steering Line Fittings	25	34	Use new O-rings
⚠️ Rack Bolts	75	102	—
⚠️ Rack Mounting Bolts	75	102	—
⚠️ Tie Rod End Nut	40	54	Use new cotter pin
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Coupler Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering coupler on a 2000-2000 Jeep Wrangler?

The primary torque specification for steering coupler on a 2000-2000 Jeep Wrangler is 34 Nm (25 lb-ft).

How many torque specs are there for Jeep Wrangler steering coupler?

There are 9 torque specifications for steering coupler on the 2000-2000 Jeep Wrangler 2.4L I4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes