ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Jeep/Wrangler/2011-2011 3.8L V6/Engine Mounts - All

2011-2011 Jeep Wrangler Engine Mounts - All Torque Specs

3.8L V6

The 2011 Jeep Wrangler is equipped with a 3.8L V6 engine. Below you'll find detailed engine mounts - all torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:4 hours

View Labor Time Details →

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	14	19	—
Cover Bolts	14	19	—
Electrical Connector Bolts	6	8	—
⚠️ Gasket Surface Bolts	17	23	Clean mating surfaces
⚠️ Mounting Bolts	40	54	—
⚠️ Mounting Bolts	40	55	—
⚠️ Mount Through Bolt	75	101	—
⚠️ Mount-to-Frame Bolts	52	70	—
Sensor Bolts	9	12	—
Sensor Mounting Bolts	9	12	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Engine Mounts - All Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for engine mounts - all on a 2011-2011 Jeep Wrangler?

The primary torque specification for engine mounts - all on a 2011-2011 Jeep Wrangler is 19 Nm (14 lb-ft).

How many torque specs are there for Jeep Wrangler engine mounts - all?

There are 10 torque specifications for engine mounts - all on the 2011-2011 Jeep Wrangler 3.8L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes