Home/Torque Specs/Jeep/Wrangler/2012-2012 3.6L V6/Upper Control Arm - Front

2012-2012 Jeep Wrangler Upper Control Arm - Front Torque Specs

3.6L V6

The 2012 Jeep Wrangler is equipped with a 3.6L V6 engine. Below you'll find detailed upper control arm - front torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values6 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	75	102	Use new cotter pin
⚠️ Control Arm Bolts	109	148	Torque with weight on wheels
Mounting Bolts	23	31	—
⚠️ Strut Bolts	98	133	—
⚠️ Sway Bar Link	52	71	—
⚠️ Wheel Lug Nuts	115	156	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm - Front Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for upper control arm - front on a 2012-2012 Jeep Wrangler?

The primary torque specification for upper control arm - front on a 2012-2012 Jeep Wrangler is 102 Nm (75 lb-ft). Note: Use new cotter pin

How many torque specs are there for Jeep Wrangler upper control arm - front?

There are 6 torque specifications for upper control arm - front on the 2012-2012 Jeep Wrangler 3.6L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes