Home/Torque Specs/Jeep/Wrangler/2017-2017 3.6L V6/Differential Fluid Change - Rear

2017-2017 Jeep Wrangler Differential Fluid Change - Rear Torque Specs

3.6L V6

The 2017 Jeep Wrangler is equipped with a 3.6L V6 engine. Below you'll find detailed differential fluid change - rear torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.5 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	207	281	Use new nut, stake after
Cover Screws	9	12	—
⚠️ CV Bolts	52	70	—
⚠️ CV Joint Bolts	52	71	—
⚠️ Differential Cover Bolts	29	39	Apply RTV sealant
⚠️ Driveshaft Bolts	63	85	—
Mounting Bolts	23	31	—
⚠️ Wheel Lug Nuts	115	156	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Differential Fluid Change - Rear Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for differential fluid change - rear on a 2017-2017 Jeep Wrangler?

The primary torque specification for differential fluid change - rear on a 2017-2017 Jeep Wrangler is 281 Nm (207 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Jeep Wrangler differential fluid change - rear?

There are 8 torque specifications for differential fluid change - rear on the 2017-2017 Jeep Wrangler 3.6L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes