Home/Torque Specs/Kia/Niro EV/2018-2018 Electric/Blower Motor Control Module

2018-2018 Kia Niro EV Blower Motor Control Module Torque Specs

Electric

The 2018 Kia Niro EV is equipped with a electric engine. Below you'll find detailed blower motor control module torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
Battery Terminal Bolts	4	6	Do not overtighten
Bracket Bolts	15	20	—
Connector Screws	3	4	—
Cover Screws	8	11	—
⚠️ Ground Bolt	10	14	—
⚠️ Ground Strap Bolt	10	14	Clean contact surfaces
Ground Strap Bolts	9	12	Ensure clean contact
Module Mounting Bolts	6	8	—
⚠️ Mounting Bolts	25	34	—
Sensor Mounting Bolts	7	10	—
⚠️ Terminal Bolts	5	7	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Blower Motor Control Module Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for blower motor control module on a 2018-2018 Kia Niro EV?

The primary torque specification for blower motor control module on a 2018-2018 Kia Niro EV is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Kia Niro EV blower motor control module?

There are 11 torque specifications for blower motor control module on the 2018-2018 Kia Niro EV Electric, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes