Home/Torque Specs/Lincoln/Continental/2000-2000 4.6L V8 DOHC/Steering Angle Sensor

2000-2000 Lincoln Continental Steering Angle Sensor Torque Specs

4.6L V8 DOHC

The 2000 Lincoln Continental is equipped with a 4.6L V8 engine. Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	10	14	—
Mounting Bolts	25	34	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	94	127	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	50	68	—
⚠️ Wheel Lug Nuts	125	169	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 2000-2000 Lincoln Continental?

The primary torque specification for steering angle sensor on a 2000-2000 Lincoln Continental is 14 Nm (10 lb-ft).

How many torque specs are there for Lincoln Continental steering angle sensor?

There are 8 torque specifications for steering angle sensor on the 2000-2000 Lincoln Continental 4.6L V8 DOHC, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes