ShopBaseComplete shop management for auto repair shops · $249/mo
Try ShopBase →
Home/Torque Specs/Mazda/Mazda3/2007-2007 2.0L I4/Long Block Replacement

2007-2007 Mazda Mazda3 Long Block Replacement Torque Specs

2.0L I4

The 2007 Mazda Mazda3 is equipped with a 2.0L inline-4 engine. Below you'll find detailed long block replacement torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:XFB
Labor Time:12 hours
View Labor Time Details →

🔧 Torque Values18 specifications

Componentlb-ftNmNotes
1014Tighten in sequence from center outward, multiple passes
3345TTY - critical torque plus angle
1216—
4865TTY - tighten in sequence plus angle
2230Apply anti-seize, work hot-to-cold
7095Often TTY, tighten in star pattern
1520—
1825—
5575TTY - tighten in sequence plus angle
3547—
2027—
2635Use new crush washer
912—
811—
1825Install with pin/clip to compress
1825Tighten in sequence
4155—
710Tighten in sequence
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Long Block Replacement Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for long block replacement on a 2007-2007 Mazda Mazda3?

The primary torque specification for long block replacement on a 2007-2007 Mazda Mazda3 is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Mazda Mazda3 long block replacement?

There are 18 torque specifications for long block replacement on the 2007-2007 Mazda Mazda3 2.0L I4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes