The 2016 AMG GT with its M177 4.0L twin-turbo V8 is a high-performance machine that suffers from serious engine bearing failures and driveline issues when pushed hard or neglected. Early production engines are particularly vulnerable to catastrophic internal damage.
Connecting Rod and Main Bearing Failure (M177 Engine)
Occasional · high severityTypical onset: 30,000-60,000 mi
Symptoms: Metallic knocking or ticking from engine at idle, Oil pressure warning light, Metal particles in oil during analysis, Sudden catastrophic engine failure with loss of power
Fix: Requires complete engine disassembly with crankshaft removal, bearing replacement, and often machining work. Early M177 engines had inadequate bearing supply to the connecting rods under high load. Many cases require short block replacement. 40-60 labor hours for in-chassis rebuild, more if removal required.
Estimated cost: $15,000-35,000
Driveshaft Center Support Bearing Failure
Common · medium severityTypical onset: 40,000-70,000 mi
Symptoms: Clunking or vibration during acceleration, Grinding noise from underneath vehicle at highway speeds, Vibration that worsens with speed, Physical play in driveshaft when inspected on lift
Fix: The two-piece carbon fiber driveshaft has a center support bearing that wears prematurely, especially on cars driven hard. Requires driveshaft removal and bearing/flex disc replacement. Mercedes issued recall 2017090005 for this. 3-5 labor hours.
Estimated cost: $1,200-2,000
Transmission Oil Cooler Leaks
Occasional · medium severityTypical onset: 50,000-80,000 mi
Symptoms: Transmission fluid spots under vehicle, Low transmission fluid warnings, Transmission overheating messages, Burnt fluid smell after spirited driving
Fix: The 7-speed DCT runs hot under performance use and the oil cooler lines or cooler itself can develop leaks at connection points. Requires cooler and line replacement, system flush. 4-6 labor hours depending on cooler location access.
Estimated cost: $1,500-2,800
Transmission Mount Failure
Common · low severityTypical onset: 35,000-65,000 mi
Symptoms: Clunking when shifting from Park to Drive, Excessive driveline lash on throttle application, Vibration through chassis under acceleration, Visible tearing or fluid leaking from mount
Fix: The rear DCT mount takes heavy abuse from launches and aggressive shifts. Hydraulic fluid leaks from the mount cause excessive movement. Relatively straightforward replacement requiring transmission support. 2-3 labor hours.
Estimated cost: $800-1,400
Fuel Filter Clogging (High-Performance Use)
Occasional · medium severitySymptoms: Fuel pressure faults during hard acceleration, Limp mode activation under full throttle, Hesitation or stumbling at high RPM, Multiple misfires under load
Fix: The high-pressure fuel system is sensitive to contamination. Track use or poor fuel quality can clog the main fuel filter prematurely. Filter is integrated into the fuel pump assembly. 3-4 labor hours for pump/filter module replacement.
Estimated cost: $1,200-1,800
Turbocharger Wastegate Rattle
Occasional · low severityTypical onset: 45,000-85,000 mi
Symptoms: Rattling noise from engine bay on cold start, Metallic ticking that disappears when warm, Overboost or underboost codes, Reduced power in extreme cases
Fix: Internal wastegate actuator arms develop play causing rattle, common to many hot-V turbo engines. Often requires turbocharger replacement as assemblies aren't serviceable. 8-12 labor hours per side due to hot-V configuration between cylinder banks.
Estimated cost: $4,000-7,000
Buy only with comprehensive service records and oil analysis history, or budget for a potential engine rebuild—the performance is exceptional but the M177 bearing issues make early examples a significant financial risk.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.