Home/Torque Specs/Mitsubishi/Lancer/2011-2011 2.0L I4/Electric Power Steering Module

2011-2011 Mitsubishi Lancer Electric Power Steering Module Torque Specs

2.0L I4

The 2011 Mitsubishi Lancer is equipped with a 2.0L inline-4 engine. Below you'll find detailed electric power steering module torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	25	34	—
Cover Screws	8	11	—
Mounting Bolts	20	27	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings
⚠️ Rack Bolts	75	102	—
⚠️ Rack Mounting Bolts	75	102	—
⚠️ Steering Rack Bolts	74	100	—
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin
⚠️ Tie Rod End Nut	40	54	Use new cotter pin
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Electric Power Steering Module Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for electric power steering module on a 2011-2011 Mitsubishi Lancer?

The primary torque specification for electric power steering module on a 2011-2011 Mitsubishi Lancer is 34 Nm (25 lb-ft).

How many torque specs are there for Mitsubishi Lancer electric power steering module?

There are 11 torque specifications for electric power steering module on the 2011-2011 Mitsubishi Lancer 2.0L I4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes