Home/Torque Specs/Oldsmobile/Cutlass/1997-1999 3.1L V6/Synchros - Single Gear

1997-1999 Oldsmobile Cutlass Synchros - Single Gear Torque Specs

3.1L V6

Applies to 1997, 1998, and 1999 Oldsmobile Cutlass

Labor Time:10 hours

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Drain Plug	25	34	Use new washer
⚠️ Fill Plug	25	34	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	20	27	—
⚠️ Mounting Bolts	45	61	—
⚠️ Mounting Bolts	45	61	—
⚠️ Pan Bolts	12	16	—
⚠️ Pan Bolts	12	16	Torque in sequence
Sensor Bolts	8	11	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Synchros - Single Gear Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for synchros - single gear on a 1997-1999 Oldsmobile Cutlass?

The primary torque specification for synchros - single gear on a 1997-1999 Oldsmobile Cutlass is 11 Nm (8 lb-ft).

How many torque specs are there for Oldsmobile Cutlass synchros - single gear?

There are 13 torque specifications for synchros - single gear on the 1997-1999 Oldsmobile Cutlass 3.1L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes