Home/Torque Specs/Polestar/2/2021-2021 Standard Range Single Motor FWD/Climate Control Module

2021-2021 Polestar 2 Climate Control Module Torque Specs

Standard Range Single Motor FWD

The 2021 Polestar 2 is equipped with a Standard Range Single Motor FWD engine (FWD). Below you'll find detailed climate control module torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ AC Line Fittings	15	20	Use new O-rings, add PAG oil
Blower Motor Screws	3	4	—
Bracket Bolts	15	20	—
⚠️ Compressor Bolts	25	34	—
Cover Screws	8	11	—
Hose Clamps	2	3	—
⚠️ Line Fittings	15	20	—
Mounting Bolts	20	27	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Climate Control Module Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for climate control module on a 2021-2021 Polestar 2?

The primary torque specification for climate control module on a 2021-2021 Polestar 2 is 20 Nm (15 lb-ft). Note: Use new O-rings, add PAG oil

How many torque specs are there for Polestar 2 climate control module?

There are 8 torque specifications for climate control module on the 2021-2021 Polestar 2 Standard Range Single Motor FWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes