Home/Torque Specs/Ram/1500/2009-2012 4.7L V8/Transmission Input Shaft Bearing

2009-2012 Ram 1500 Transmission Input Shaft Bearing Torque Specs

4.7L V8

Applies to 2009, 2010, 2011, and 2012 Ram 1500

Labor Time:10.4 hours

🔧 Torque Values18 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
Cover Screws	8	11	—
⚠️ Drain Plug	25	34	Use new washer
Drain Plug	25	34	Use new washer
⚠️ Fill Plug	25	34	—
Fill Plug	25	34	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	45	61	—
Mounting Bolts	45	61	—
Pan Bolts	12	16	Torque in sequence
⚠️ Pan Bolts	12	16	Torque in sequence
Sensor Bolts	8	11	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Input Shaft Bearing Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for transmission input shaft bearing on a 2009-2012 Ram 1500?

The primary torque specification for transmission input shaft bearing on a 2009-2012 Ram 1500 is 11 Nm (8 lb-ft).

How many torque specs are there for Ram 1500 transmission input shaft bearing?

There are 18 torque specifications for transmission input shaft bearing on the 2009-2012 Ram 1500 4.7L V8, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes