Home/Torque Specs/Rolls-Royce/Corniche/2000-2002 6.75L V8/Brake Rotor - Front Single

2000-2002 Rolls-Royce Corniche Brake Rotor - Front Single Torque Specs

6.75L V8

Applies to 2000, 2001, and 2002 Rolls-Royce Corniche

Labor Time:0.8 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Bleeder Screw	7	10	Do not overtighten \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Caliper Bolts	65	88	—
⚠️ Caliper Bracket Bolts	75	102	—
⚠️ Caliper Bracket Bolts - Front	88	120	Threadlocker recommended \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Caliper Slide Pin Bolts	26	35	Apply silicone brake grease \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Hub Nut	180	244	If removed
Rotor Set Screws	5	7	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Brake Rotor - Front Single Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for brake rotor - front single on a 2000-2002 Rolls-Royce Corniche?

The primary torque specification for brake rotor - front single on a 2000-2002 Rolls-Royce Corniche is 10 Nm (7 lb-ft). Note: Do not overtighten | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Rolls-Royce Corniche brake rotor - front single?

There are 8 torque specifications for brake rotor - front single on the 2000-2002 Rolls-Royce Corniche 6.75L V8, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes