ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Subaru/Forester/2011-2011 2.5L H4/Rack and Pinion Boots

2011-2011 Subaru Forester Rack and Pinion Boots Torque Specs

2.5L H4

The 2011 Subaru Forester is equipped with a 2.5L flat-4 engine. Below you'll find detailed rack and pinion boots torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
Mounting Bolts	20	27	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings
⚠️ Rack Bolts	75	102	—
⚠️ Steering Rack Bolts	74	100	—
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Rack and Pinion Boots Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for rack and pinion boots on a 2011-2011 Subaru Forester?

The primary torque specification for rack and pinion boots on a 2011-2011 Subaru Forester is 11 Nm (8 lb-ft).

How many torque specs are there for Subaru Forester rack and pinion boots?

There are 8 torque specifications for rack and pinion boots on the 2011-2011 Subaru Forester 2.5L H4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes