Home/Torque Specs/Subaru/Impreza/2017-2024 2.0L H4/Timing Chain Kit

2017-2024 Subaru Impreza Timing Chain Kit Torque Specs

2.0L H4

Applies to 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Subaru Impreza

Labor Time:9 hours

🔧 Torque Values20 specifications

Component	lb-ft	Nm	Notes
⚠️ Cam Phaser Bolt	48	65	Apply threadlocker, hold cam stationary
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
Cover Bolts	12	16	—
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
Electrical Connector Bolts	5	7	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Guide Bolts	18	24	—
⚠️ Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Oil Pump Bolts	9	12	—
Sensor Mounting Bolts	8	11	—
⚠️ Tensioner Bolt	15	20	—
⚠️ Timing Chain Guide Bolts	9	12	Replace if worn
⚠️ Timing Chain Idler Sprocket	18	25	—
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
⚠️ Timing Cover Bolts	10	14	—
⚠️ Timing Cover Bolts - 10mm	33	45	Tighten in sequence
Timing Cover Bolts - 6mm	7	10	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Timing Chain Kit Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Mitsubishi Eclipse

2006-2012 2.4L I4

Common Questions

What is the torque spec for timing chain kit on a 2017-2024 Subaru Impreza?

The primary torque specification for timing chain kit on a 2017-2024 Subaru Impreza is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Subaru Impreza timing chain kit?

There are 20 torque specifications for timing chain kit on the 2017-2024 Subaru Impreza 2.0L H4, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes