Home/Torque Specs/Subaru/Outback/1996-1996 2.5L H4/Transmission Speed Sensor - Input

1996-1996 Subaru Outback Transmission Speed Sensor - Input Torque Specs

2.5L H4

The 1996 Subaru Outback is equipped with a 2.5L flat-4 engine. Below you'll find detailed transmission speed sensor - input torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	20	27	—
⚠️ Mounting Bolts	45	61	—
⚠️ Pan Bolts	12	16	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Speed Sensor - Input Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission speed sensor - input on a 1996-1996 Subaru Outback?

The primary torque specification for transmission speed sensor - input on a 1996-1996 Subaru Outback is 11 Nm (8 lb-ft).

How many torque specs are there for Subaru Outback transmission speed sensor - input?

There are 8 torque specifications for transmission speed sensor - input on the 1996-1996 Subaru Outback 2.5L H4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes