ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Subaru/Outback/2006-2006 3.0L H6/O2 Sensor - Downstream

2006-2006 Subaru Outback O2 Sensor - Downstream Torque Specs

3.0L H6

The 2006 Subaru Outback is equipped with a 3.0L flat-6 engine. Below you'll find detailed o2 sensor - downstream torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.5 hours

View Labor Time Details →

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
⚠️ Exhaust Flange Bolts	33	45	Apply anti-seize
⚠️ Flange Bolts	37	50	Apply anti-seize
Hanger Bolts	16	22	—
Heat Shield Bolts	7	10	—
⚠️ Manifold Nuts	26	35	Apply anti-seize
Mounting Bolts	21	28	—
⚠️ O2 Sensor	33	45	Apply anti-seize to threads only

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

O2 Sensor - Downstream Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for o2 sensor - downstream on a 2006-2006 Subaru Outback?

The primary torque specification for o2 sensor - downstream on a 2006-2006 Subaru Outback is 45 Nm (33 lb-ft). Note: Apply anti-seize

How many torque specs are there for Subaru Outback o2 sensor - downstream?

There are 7 torque specifications for o2 sensor - downstream on the 2006-2006 Subaru Outback 3.0L H6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes