Home/Torque Specs/Subaru/Outback/2008-2008 3.0L H6/Transmission Range Sensor

2008-2008 Subaru Outback Transmission Range Sensor Torque Specs

3.0L H6

The 2008 Subaru Outback is equipped with a 3.0L flat-6 engine. Below you'll find detailed transmission range sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Drain Plug	26	35	Use new washer
⚠️ Fill Plug	26	35	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	47	64	—
⚠️ Pan Bolts	13	18	Torque in sequence
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Range Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission range sensor on a 2008-2008 Subaru Outback?

The primary torque specification for transmission range sensor on a 2008-2008 Subaru Outback is 11 Nm (8 lb-ft).

How many torque specs are there for Subaru Outback transmission range sensor?

There are 9 torque specifications for transmission range sensor on the 2008-2008 Subaru Outback 3.0L H6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes