ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Subaru/Outback/2010-2010 3.6L H6/Trunk Hinge

2010-2010 Subaru Outback Trunk Hinge Torque Specs

3.6L H6

The 2010 Subaru Outback is equipped with a 3.6L flat-6 engine. Below you'll find detailed trunk hinge torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
Body Panel Bolts	18	25	—
Bracket Bolts	17	23	—
Bumper Cover Bolts	7	10	—
Cover Screws	9	12	—
⚠️ Door Hinge Bolts	22	30	—
⚠️ Hinge Bolts	23	31	—
Latch Bolts	12	16	—
Mounting Bolts	23	31	—
Panel Bolts	12	16	—
Sensor Bolts	9	12	—
⚠️ Striker Bolts	29	39	—
Trim Clips	2	3	Replace if broken

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Trunk Hinge Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for trunk hinge on a 2010-2010 Subaru Outback?

The primary torque specification for trunk hinge on a 2010-2010 Subaru Outback is 25 Nm (18 lb-ft).

How many torque specs are there for Subaru Outback trunk hinge?

There are 12 torque specifications for trunk hinge on the 2010-2010 Subaru Outback 3.6L H6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes