Home/Torque Specs/Subaru/Outback/2010-2012 2.5L H4/Drum Brake Hardware Kit

2010-2012 Subaru Outback Drum Brake Hardware Kit Torque Specs

2.5L H4

Applies to 2010, 2011, and 2012 Subaru Outback

Labor Time:1 hours

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Bleeder Screw	7	10	Do not overtighten \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Bracket Bolts	75	102	—
⚠️ Bracket Bolts	75	102	—
⚠️ Caliper Bolts	65	88	—
⚠️ Caliper Bolts	65	88	Use thread locker
⚠️ Caliper Bracket Bolts - Front	88	120	Threadlocker recommended \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Caliper Slide Pin Bolts	26	35	Apply silicone brake grease \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Line Fittings	15	20	Use line wrench
Mounting Bolts	20	27	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Drum Brake Hardware Kit Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for drum brake hardware kit on a 2010-2012 Subaru Outback?

The primary torque specification for drum brake hardware kit on a 2010-2012 Subaru Outback is 10 Nm (7 lb-ft). Note: Do not overtighten | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Subaru Outback drum brake hardware kit?

There are 10 torque specifications for drum brake hardware kit on the 2010-2012 Subaru Outback 2.5L H4, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes