Home/Torque Specs/Subaru/Outback/2015-2019 3.6L H6/Timing Chain Kit

2015-2019 Subaru Outback Timing Chain Kit Torque Specs

3.6L H6

Applies to 2015, 2016, 2017, 2018, and 2019 Subaru Outback

Labor Time:9 hours

🔧 Torque Values15 specifications

Component	lb-ft	Nm	Notes
⚠️ Cam Phaser Bolt	48	65	Apply threadlocker, hold cam stationary
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
⚠️ Guide Bolts	21	28	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Oil Pump Bolts	9	12	—
⚠️ Tensioner Bolt	17	23	—
⚠️ Timing Chain Guide Bolts	9	12	Replace if worn
⚠️ Timing Chain Idler Sprocket	18	25	—
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
⚠️ Timing Cover Bolts	12	16	—
⚠️ Timing Cover Bolts - 10mm	33	45	Tighten in sequence
Timing Cover Bolts - 6mm	7	10	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Timing Chain Kit Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Mitsubishi Eclipse

2006-2012 2.4L I4

Common Questions

What is the torque spec for timing chain kit on a 2015-2019 Subaru Outback?

The primary torque specification for timing chain kit on a 2015-2019 Subaru Outback is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Subaru Outback timing chain kit?

There are 15 torque specifications for timing chain kit on the 2015-2019 Subaru Outback 3.6L H6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes