ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Subaru/Outback/2018-2018 3.6L H6/Engine Mount - Front

2018-2018 Subaru Outback Engine Mount - Front Torque Specs

3.6L H6

The 2018 Subaru Outback is equipped with a 3.6L flat-6 engine. Below you'll find detailed engine mount - front torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	14	19	—
⚠️ Engine Mount-to-Block Bolts	48	65	—
⚠️ Engine Mount-to-Frame Bolts	55	75	—
⚠️ Mounting Bolts	40	55	—
⚠️ Mount Through Bolt	75	101	—
⚠️ Mount-to-Frame Bolts	52	70	—
Sensor Bolts	9	12	—
⚠️ Through-Bolt	63	85	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Engine Mount - Front Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for engine mount - front on a 2018-2018 Subaru Outback?

The primary torque specification for engine mount - front on a 2018-2018 Subaru Outback is 19 Nm (14 lb-ft).

How many torque specs are there for Subaru Outback engine mount - front?

There are 8 torque specifications for engine mount - front on the 2018-2018 Subaru Outback 3.6L H6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes