ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Subaru/Outback/2020-2020 2.5L H4/Upper Control Arm

2020-2020 Subaru Outback Upper Control Arm Torque Specs

2.5L H4

The 2020 Subaru Outback is equipped with a 2.5L flat-4 engine. Below you'll find detailed upper control arm torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	65	88	—
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Mounting Bolts	20	27	—
⚠️ Strut Bolts	85	115	—
⚠️ Strut Tower Nuts	37	50	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for upper control arm on a 2020-2020 Subaru Outback?

The primary torque specification for upper control arm on a 2020-2020 Subaru Outback is 88 Nm (65 lb-ft).

How many torque specs are there for Subaru Outback upper control arm?

There are 7 torque specifications for upper control arm on the 2020-2020 Subaru Outback 2.5L H4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes