2006-2014 Subaru Tribeca Engine Rebuild Torque Specs
3.0L H6
Applies to 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, and 2014 Subaru Tribeca
🔧 Torque Values23 specifications
| Component | lb-ft | Nm | Notes |
|---|
| 18 | 25 | — |
| 10 | 14 | Tighten in sequence, 3 passes |
| 10 | 14 | Tighten in sequence from center outward, multiple passes |
| 33 | 45 | TTY - critical torque plus angle |
| 13 | 17 | — |
| 133 | 180 | Often TTY - check spec, may require impact |
| 48 | 65 | TTY - tighten in sequence plus angle |
| 22 | 30 | Apply anti-seize, work hot-to-cold |
| 70 | 95 | Often TTY, tighten in star pattern |
| 16 | 21 | — |
| 18 | 25 | — |
| 55 | 75 | TTY - tighten in sequence plus angle |
| 21 | 28 | — |
| 37 | 50 | — |
| 26 | 35 | Use new crush washer |
| 9 | 12 | Tighten in sequence |
| 9 | 12 | — |
| 9 | 12 | — |
| 8 | 11 | — |
| 9 | 12 | Replace if worn |
| 18 | 25 | Install with pin/clip to compress |
| 18 | 25 | Tighten in sequence |
| 7 | 10 | Tighten in sequence |
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.
Other Jobs with Torque Specs
Engine Rebuild Torque Specs on Other Vehicles
Common Questions
What is the torque spec for engine rebuild on a 2006-2014 Subaru Tribeca?
The primary torque specification for engine rebuild on a 2006-2014 Subaru Tribeca is 25 Nm (18 lb-ft).
How many torque specs are there for Subaru Tribeca engine rebuild?
There are 23 torque specifications for engine rebuild on the 2006-2014 Subaru Tribeca 3.0L H6, covering all related fasteners and components.