Home/Torque Specs/Subaru/Tribeca/2011-2011 3.0L H6/Transmission Range Sensor

2011-2011 Subaru Tribeca Transmission Range Sensor Torque Specs

3.0L H6

The 2011 Subaru Tribeca is equipped with a 3.0L flat-6 engine. Below you'll find detailed transmission range sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	21	28	—
⚠️ Mounting Bolts	47	64	—
⚠️ Pan Bolts	13	17	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Range Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission range sensor on a 2011-2011 Subaru Tribeca?

The primary torque specification for transmission range sensor on a 2011-2011 Subaru Tribeca is 11 Nm (8 lb-ft).

How many torque specs are there for Subaru Tribeca transmission range sensor?

There are 8 torque specifications for transmission range sensor on the 2011-2011 Subaru Tribeca 3.0L H6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes