Home/Torque Specs/Tesla/Model 3/2017-2020 Standard Range Plus Single Motor RWD/Combination Switch

Combination Switch Torque Specifications

2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD

Labor Time:2 hours

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
Battery Terminal Bolts	4	6	Do not overtighten
Bracket Bolts	15	20	—
Connector Screws	3	4	—
Cover Screws	8	11	—
⚠️ Ground Bolt	10	14	—
⚠️ Ground Strap Bolt	10	14	Clean contact surfaces
Ground Strap Bolts	9	12	Ensure clean contact
Module Mounting Bolts	6	8	—
⚠️ Mounting Bolts	25	34	—
Sensor Mounting Bolts	7	10	—
⚠️ Terminal Bolts	5	7	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Combination Switch Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for combination switch on a 2017-2020 Tesla Model 3?

The primary torque specification for combination switch on a 2017-2020 Tesla Model 3 is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Tesla Model 3 combination switch?

There are 11 torque specifications for combination switch on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes