Home/Torque Specs/Tesla/Model 3/2017-2020 Standard Range Plus Single Motor RWD/Cooling Fan Assembly

Cooling Fan Assembly Torque Specifications

2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD

Labor Time:1 hours

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
Coolant Drain Plug	11	15	—
Cover Screws	8	11	—
Drain Petcock	5	7	Hand tight
Fan Bolts	8	11	—
Hose Clamps	2	3	—
⚠️ Housing Bolts	10	14	—
Mounting Bolts	20	27	—
⚠️ Pump Bolts	18	24	Torque in sequence
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Cooling Fan Assembly Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for cooling fan assembly on a 2017-2020 Tesla Model 3?

The primary torque specification for cooling fan assembly on a 2017-2020 Tesla Model 3 is 15 Nm (11 lb-ft).

How many torque specs are there for Tesla Model 3 cooling fan assembly?

There are 10 torque specifications for cooling fan assembly on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes