Home/Torque Specs/Tesla/Model 3/2017-2020 Standard Range Plus Single Motor RWD/Connecting Rod Bearings

2017-2020 Tesla Model 3 Connecting Rod Bearings Torque Specs

Standard Range Plus Single Motor RWD

Applies to 2017, 2018, 2019, and 2020 Tesla Model 3

Labor Time:8 hours

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Connecting Rod Bolts	33	45	TTY - critical torque plus angle
Cover Bolts	12	16	—
Electrical Connector Bolts	5	7	—
⚠️ Gasket Bolts	15	20	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Oil Pan Bolts	9	12	Tighten in sequence
Sensor Bolts	8	11	—
Sensor Mounting Bolts	8	11	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Connecting Rod Bearings Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for connecting rod bearings on a 2017-2020 Tesla Model 3?

The primary torque specification for connecting rod bearings on a 2017-2020 Tesla Model 3 is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Tesla Model 3 connecting rod bearings?

There are 10 torque specifications for connecting rod bearings on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes