Home/Torque Specs/Tesla/Model 3/2017-2020 Standard Range Plus Single Motor RWD/Steering Shaft - Intermediate

Steering Shaft - Intermediate Torque Specifications

2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD

Labor Time:1.5 hours

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	25	34	—
Cover Screws	8	11	—
Mounting Bolts	20	27	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	75	102	—
⚠️ Rack Mounting Bolts	75	102	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	40	54	Use new cotter pin
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Shaft - Intermediate Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for steering shaft - intermediate on a 2017-2020 Tesla Model 3?

The primary torque specification for steering shaft - intermediate on a 2017-2020 Tesla Model 3 is 34 Nm (25 lb-ft).

How many torque specs are there for Tesla Model 3 steering shaft - intermediate?

There are 11 torque specifications for steering shaft - intermediate on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes