Home/Torque Specs/Tesla/Model 3/2017-2020 Standard Range Plus Single Motor RWD/Tonneau Cover Install

2017-2020 Tesla Model 3 Tonneau Cover Install Torque Specs

Standard Range Plus Single Motor RWD

Applies to 2017, 2018, 2019, and 2020 Tesla Model 3

Labor Time:1 hours

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
Body Panel Bolts	18	25	—
Bracket Bolts	15	20	—
Bumper Cover Bolts	7	10	—
Cover Screws	8	11	—
⚠️ Door Hinge Bolts	22	30	—
⚠️ Hinge Bolts	20	27	—
Latch Bolts	10	14	—
Mounting Bolts	20	27	—
Panel Bolts	10	14	—
Sensor Bolts	8	11	—
⚠️ Striker Bolts	25	34	—
Trim Clips	2	3	Replace if broken

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Tonneau Cover Install Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for tonneau cover install on a 2017-2020 Tesla Model 3?

The primary torque specification for tonneau cover install on a 2017-2020 Tesla Model 3 is 25 Nm (18 lb-ft).

How many torque specs are there for Tesla Model 3 tonneau cover install?

There are 12 torque specifications for tonneau cover install on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes