Home/Torque Specs/Tesla/Model 3/2017-2020 Standard Range Plus Single Motor RWD/U-Joint

U-Joint Torque Specifications

2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD

Labor Time:1 hours

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	180	244	Use new nut, stake after
⚠️ CV Bolts	45	61	—
⚠️ CV Joint Bolts	45	61	—
Cover Screws	8	11	—
⚠️ Differential Cover Bolts	25	34	Apply RTV sealant
⚠️ Driveshaft Bolts	55	75	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	20	27	—
⚠️ Wheel Lug Nuts	100	136	—
⚠️ Yoke Nut	111	150	If equipped

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

U-Joint Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for u-joint on a 2017-2020 Tesla Model 3?

The primary torque specification for u-joint on a 2017-2020 Tesla Model 3 is 244 Nm (180 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Tesla Model 3 u-joint?

There are 10 torque specifications for u-joint on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes