Home/Torque Specs/Tesla/Model 3/2018-2018 Performance Dual Motor AWD/Subframe Bushing

2018-2018 Tesla Model 3 Subframe Bushing Torque Specs

Performance Dual Motor AWD

The 2018 Tesla Model 3 is equipped with a Performance Dual Motor AWD engine (AWD). Below you'll find detailed subframe bushing torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:4 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	65	88	Use new cotter pin
⚠️ Ball Joint Nut	65	88	—
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Mounting Bolts	20	27	—
⚠️ Strut Bolts	85	115	—
⚠️ Strut Bolts	85	115	—
⚠️ Strut Tower Nuts	37	50	—
⚠️ Sway Bar Link	45	61	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	100	136	—
⚠️ Wheel Lug Nuts	100	136	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Subframe Bushing Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for subframe bushing on a 2018-2018 Tesla Model 3?

The primary torque specification for subframe bushing on a 2018-2018 Tesla Model 3 is 88 Nm (65 lb-ft). Note: Use new cotter pin

How many torque specs are there for Tesla Model 3 subframe bushing?

There are 11 torque specifications for subframe bushing on the 2018-2018 Tesla Model 3 Performance Dual Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes