Home/Torque Specs/Tesla/Model 3/2020-2020 Performance Dual Motor AWD/CV Boot - Outer

2020-2020 Tesla Model 3 CV Boot - Outer Torque Specs

Performance Dual Motor AWD

The 2020 Tesla Model 3 is equipped with a Performance Dual Motor AWD engine (AWD). Below you'll find detailed cv boot - outer torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
Cover Screws	8	11	—
⚠️ CV Bolts	45	61	—
⚠️ CV Joint Bolts	45	61	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft Bolts	55	75	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	20	27	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

CV Boot - Outer Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for cv boot - outer on a 2020-2020 Tesla Model 3?

The primary torque specification for cv boot - outer on a 2020-2020 Tesla Model 3 is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Tesla Model 3 cv boot - outer?

There are 9 torque specifications for cv boot - outer on the 2020-2020 Tesla Model 3 Performance Dual Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes