Home/Torque Specs/Tesla/Model 3/2020-2020 Performance Dual Motor AWD/Leaf Spring Bushing

2020-2020 Tesla Model 3 Leaf Spring Bushing Torque Specs

Performance Dual Motor AWD

The 2020 Tesla Model 3 is equipped with a Performance Dual Motor AWD engine (AWD). Below you'll find detailed leaf spring bushing torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	65	88	Use new cotter pin
⚠️ Ball Joint Nut	65	88	—
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Mounting Bolts	20	27	—
⚠️ Strut Bolts	85	115	—
⚠️ Strut Bolts	85	115	—
⚠️ Strut Tower Nuts	37	50	—
⚠️ Sway Bar Link	45	61	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	100	136	Torque in star pattern
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Leaf Spring Bushing Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for leaf spring bushing on a 2020-2020 Tesla Model 3?

The primary torque specification for leaf spring bushing on a 2020-2020 Tesla Model 3 is 88 Nm (65 lb-ft). Note: Use new cotter pin

How many torque specs are there for Tesla Model 3 leaf spring bushing?

There are 11 torque specifications for leaf spring bushing on the 2020-2020 Tesla Model 3 Performance Dual Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes