Home/Torque Specs/Tesla/Model 3/2020-2020 Performance Dual Motor AWD/Trunk Hinge

2020-2020 Tesla Model 3 Trunk Hinge Torque Specs

Performance Dual Motor AWD

The 2020 Tesla Model 3 is equipped with a Performance Dual Motor AWD engine (AWD). Below you'll find detailed trunk hinge torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
Body Panel Bolts	18	25	—
Bracket Bolts	15	20	—
Bumper Cover Bolts	7	10	—
Cover Screws	8	11	—
⚠️ Door Hinge Bolts	22	30	—
⚠️ Hinge Bolts	20	27	—
Latch Bolts	10	14	—
Mounting Bolts	20	27	—
Panel Bolts	10	14	—
Sensor Bolts	8	11	—
⚠️ Striker Bolts	25	34	—
Trim Clips	2	3	Replace if broken

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Trunk Hinge Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for trunk hinge on a 2020-2020 Tesla Model 3?

The primary torque specification for trunk hinge on a 2020-2020 Tesla Model 3 is 25 Nm (18 lb-ft).

How many torque specs are there for Tesla Model 3 trunk hinge?

There are 12 torque specifications for trunk hinge on the 2020-2020 Tesla Model 3 Performance Dual Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes