Home/Torque Specs/Tesla/Model 3/2021-2021 Long Range Dual Motor AWD/Engine R&R

2021-2021 Tesla Model 3 Engine R&R Torque Specs

Long Range Dual Motor AWD

The 2021 Tesla Model 3 is equipped with a Long Range Dual Motor AWD engine (AWD). Below you'll find detailed engine r&r torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

🔧 Torque Values17 specifications

Component	lb-ft	Nm	Notes
⚠️ AC Compressor Bolts	18	25	—
⚠️ Alternator Mounting Bolts	37	50	—
Cover Bolts	12	16	—
Electrical Connector Bolts	5	7	—
⚠️ Engine Mount-to-Block Bolts	48	65	—
⚠️ Engine Mount-to-Frame Bolts	55	75	—
⚠️ Exhaust Manifold Nuts	22	30	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	15	20	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Power Steering Pump Bolts	18	25	—
Sensor Bolts	8	11	—
Sensor Mounting Bolts	8	11	—
⚠️ Starter Mounting Bolts	37	50	—
⚠️ Transmission-to-Engine Bolts	41	55	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Engine R&R Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for engine r&r on a 2021-2021 Tesla Model 3?

The primary torque specification for engine r&r on a 2021-2021 Tesla Model 3 is 25 Nm (18 lb-ft).

How many torque specs are there for Tesla Model 3 engine r&r?

There are 17 torque specifications for engine r&r on the 2021-2021 Tesla Model 3 Long Range Dual Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes