Home/Torque Specs/Tesla/Model 3/2021-2021 Long Range Dual Motor AWD/Headlight Assembly - Pair

2021-2021 Tesla Model 3 Headlight Assembly - Pair Torque Specs

Long Range Dual Motor AWD

The 2021 Tesla Model 3 is equipped with a Long Range Dual Motor AWD engine (AWD). Below you'll find detailed headlight assembly - pair torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.8 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
Battery Terminal Bolts	4	6	Do not overtighten
Bracket Bolts	15	20	—
Connector Screws	3	4	—
Cover Screws	8	11	—
⚠️ Ground Bolt	10	14	—
⚠️ Ground Strap Bolt	10	14	Clean contact surfaces
Ground Strap Bolts	9	12	Ensure clean contact
Module Mounting Bolts	6	8	—
⚠️ Mounting Bolts	25	34	—
Sensor Mounting Bolts	7	10	—
⚠️ Terminal Bolts	5	7	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Headlight Assembly - Pair Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for headlight assembly - pair on a 2021-2021 Tesla Model 3?

The primary torque specification for headlight assembly - pair on a 2021-2021 Tesla Model 3 is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Tesla Model 3 headlight assembly - pair?

There are 11 torque specifications for headlight assembly - pair on the 2021-2021 Tesla Model 3 Long Range Dual Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes